How To Hang The New Bracket System?
Your fixing pack should include the following; 1 x plastic wall bracket (U shape piece) 1 x plastic backing board flange (round piece) 6 x screw – 8 x 25mm dome heads (2 extra) 4 x screw – 8 x 15mm CSK Note: Both the wall bracket and flange have a centre hole Step 1: You should see a small dimple in the centre of the backing board, if not measure and mark the centre. Place the backing board flange (B) on the back of the board in the centre with the counter sink facing towards you (as per picture) (use 4 of the 8 x15mm CSK screws here), screw the centre one in first then 2 then the other 3. Note: On the Bandit Plus, the flange is already ready mounted on backing board Step 2: Measure from your floor or if you are using a dart mat measure from the top of the mat up the wall 5ft 8″ (1.73m) and mark the centre height. Place the wall bracket (A) on the wall, the U shape recess should be facing you and the recess opening to the top. Using the centre hole in the wall bracket line up your cent
