How to control a PC with dynamically assigned IP address?
Our software has two connectivity modes: Direct Connection and Account Connection. You will never have problems with IP addresses if you use Account Connection mode as you don’t use IP address to connect with remote PC in this mode. But if you use Direct Connection mode: IP address of Host Module could be dynamically assigned; therefore you should find it out after the remote PC connection to the Internet. Someone on the remote side could tell you the remote IP address by phone or e-mail for example. After that you can connect to the remote computer using that IP address. If you are often compelled to be connected to the remote computer with a dynamically assigned IP-address, and nobody on the remote side can tell you the current IP, you can use some of services, such as www.no-ip.com. It will help you to know the IP address of the remote PC even if it often changes.
