Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How to connect the reducer?

April 26, 2017Connect reducer

0

Posted

How to connect the reducer?

1 Answer

0

Posted

Please refer to the following form. Download film • The coupler shall be firmly connected the input and output shafts and two shafts shall be paralleled. The base seat shall de anchored with proper bolts. • All the components shall be properly assembled to the shaft. Hammering and over-tight assembly that could damage the bearing is not allowed. • The pulley, chain, pulley and gear shall be assembled as close as possible to the bearing so as to reduce curving stress to the minimum. The chain pulley and belt pulley used to connect the output shaft shall be properly chosen (within 6 times as large as the diameter of output shaft) and used in add ordnance with H7 tolerance in order to keep out of abnormal noise and harm to the shaft surface. • Proper amount of grease can be applied to the input hole of the additional motor board to ensure the hole against over-wearing and making abnormal noise. • The application of anti-rust paint can keep the shaft from rusting.