How To Change Valve Cover Gasket On A 3.8 Impala?
Here are the things that you will need in the process: Screwdriver Scraper 3/8 in. Drive Ratchet Socket Ratchet Set Valve Cover Gasket And here are the steps: 1. Open the hood and locate the engine valve cover. 2. Inspect around the valve cover for signs of leaking engine oil. 3. Now that you have confirmed that the valve cover gasket is leaking and needs replacement, remove the valve cover bolts using the 3/8″ ratchet and socket. 4. Remove the valve covers (V-style engine) and set them aside. If necessary, pry the covers with a screwdriver or tap them with a rubber mallet. 5. Remove the valve cover gasket from the engine block. Scrape off any gasket material stuck to the block. To remove oil, wipe down the block surface with a rag. 6. At this time, clean the valve covers with brake cleaner spray. If needed, scrape away any remaining gasket pieces left on the valve covers. 7. Attach the new valve cover gasket to the valve cover with an adhesive sealant. Lay the cover assembly on the en
