How to change rotors on a 2000 acura?
They are pretty easy. I just did my friends front rotors and pads on an 01′ Acura TL’s. Pull all wheels off. Take pads off shoud be a 14mm to take the calipers off. Compress the calipers. Hang up your calipers w/ wire or string so they are not hanging by the brake line. Next look on the back side of the carrier. There will be 2 17mm bolts holding a the bracket for the calipers and pads. If you have trouble breaking them free, use a brass or dead blow hammer on the wrench. (You will be doing the same to tighten the bolts back up.) Next there will be 2 phillips head screws on the rotors. Now these can be hard to get out w/ out stripping the head of the scews. I used an impact tool w/ a hammer to get them out. The craftsman one runs about 30 bucks. (It is not an air tool. It just looks like an oversized screw driver. It is spring loaded, so when you nail it w/ the hammer you will want to twist at the same time and it will break the screws loose.) Once those screws are out pull the rotors
