How to Change a Pushmatic Circuit Breaker?
Safety is of utmost priority and make sure you’re using a grounding mat. The power should definitely be off. Check your work again and again. When you remove the screws make sure you remember where you put them. While you change the breaker you can use Isopropyl alcohol to clean the wires and the breaker itself, just make sure you let it dry for a half hour. This guide goes into detail on how to clean a breaker but can also be used for replacing one too. If you need to buy a new circuit breaker that site can provide you with one or you can pick one up locally if applicable. Usually hafter twenty some years you’ll want to replace them anyways and make sure there isn’t too much load on one circuit in the house.
In order to change a pushmatic circuit breaker, you need to be concerned with safety first and foremost. Turn the power off at the main and ground yourself. Check to ensure that there is no power going to the panel and then you can replace the breaker. Remove the breaker, remembering or marking where each wire goes. You then reverse the process, place the wires in their proper place on the new breaker, and replace the breaker back into the panel. You can find more information at http://www.circuitbreakerguide.com/pushm…
