How should I set up the LECTURNITY Assistant in order to record a DV (Digital Video)?
• Please make sure the DV camera is turned on (and installed on the system) before you start the LECTURNITY Assistant; otherwise the device cannot be recognized by the LECTURNITY Assistant, • Then activate the video recording by clicking on the checkbox “Record video”, • By clicking on the button “Settings” you can change the settings of the DV device. Here, especially the “DV-RGB-Converter” is interesting: with this function, the DV data can be converted directly into an uncompressed (RGB) video format so that (almost) any codec can be used for compression. You can select four different video sizes (see Fig. 2). Figure 4: Settings of the DV decoder Turn on the recording on the DV camera before you start the LECTURNITY recording. Otherwise it might happen that the DV camera turns off during the LECTURNITY recording (power saving).
