How much ResureX should I add to a battery?
Batteries vary greatly in size and thus the amount of Resurex used will also vary. As a rough indicator, a small motorcycle battery will only need 2 or 3 ml per cell. An automotive battery will use 10 ml per cell. For more sophisticated calculations, the best rule is to use 10 ml of ResureX for every 100 Amps of the manufacturer’s rating. The 60 ml ResureX bottle will treat one automotive battery rated at 600CCA. For larger, heavy-duty or commercial batteries, dose at 20 ml per 100CCA. For example, a 1200CCA battery will need 240 ml of ResureX, divided into 40 ml per cell. However, with larger batteries, it is recommended Resurex be added in two steps to avoid over-dilution of the electrolyte. Therefore, add half of the ResureX before charging and half after the end of the charge. Note – for best results the battery should be cycled (charged and discharged) 21 times or used on a daily basis for two to three weeks. The Specific Gravity of a treated battery should be checked and adjusted
