How much hydraulic fluid should the clutch use?
The system should consume very little fluid. Some small amount might be lost as a film is left on the side of the cylinders when the pistons move. If the system looses more than of the reservoir in a summer, then you probably have a leak and the system is in the process of failing. Best get to work on it right away. Insufficient Pedal A typical clutch problem with TR6s is that it is difficult or impossible to shift into first or reverse gears. This is an indication that the clutch is not releasing when the clutch pedal is pressed. The system is more tolerant when shifting into the higher gears so the problem shows up initially with first and reverse. This problem is nearly always the result of insufficient movement of the slave cylinder pushrod. Note that the self-adjusting feature described previously compensates for any slack between the slave cylinder and the clutch. Therefore, the problem is most likely between the clutch pedal and the slave cylinder. The first thing to do is to me
