How much grease can the Remote Greasing System handle when used with a Model A Warm Water Shrimp Peeler?
• Each of the three grease distribution blocks has a different total grease requirement, but the totals are very simple to gauge: Peeler block: To fully lubricate the peeler, the main greasing block’s cycle pin should engage 35-40 times per grease session, which will take approximately 2 oz. of grease. Finger frame block: When grease is visibly escaping from the cam roller bearings (5-7 cycles) the finger frame is fully lubricated. Feed tank block: When grease is visibly escaping from the ¾” paddle bearing (3-5 cycles), the feed tank is fully lubricated. • When it comes time to replace the dogleg bearings on my AG70 Adjustable Grading System, why should I purchase them from Laitram? • When the AG 70 was designed, critical parts such as the dogleg bearings were spec’d out to tight standards to be able to handle the load of the machine and maintain its performance and accuracy. By simply fitting the AG 70 with an inferior bearing, performance will eventually suffer and the other maintena
