How much assembly is required with my kegerator purchase?
Our low cost kegerators require that the customer drill one hole for the shank in order to mount the faucet and screw in two self-threading screws to mount the drip tray. From start to finish, the low cost kegerator takes roughly one half-hour to build and install your kegerator. All necessary instructions are posted on our website in the Instructions section of the site. Estimated production time is 30 minutes. Sanyo beer dispenser units require significant assembly. Everything needed is included with the unit. Assembly involves mounting the casters with a screw gun (drill), mounting the chrome rack on the top using small predrilled screws, mounting the chrome draft tower, and assembling the draft equipment. Estimated time for production is 1 hour. The crme de la crme kegerator come almost fully assembled. Setup requires mounting the draft arm tower in pre-drilled holes using simple screws and assembling the draft beer dispensing equipment. The kegerator arrives virtually fully assemb
