how long it will take will depend on how bad the odor and stains are 2- how long have they been there?
3-breaking the surface tensions on the wood so the ATX ODOR KILL can penetrate. 4- Spraying the other areas of the trailer where the odors have permeated. 5- the gentleman needs to get started right away if it is to be ready for this weekend. What I would do: 1- I would mop up the floor with just water, preferably warm. 2- Prepare a 10 parts water to 1 part solution of ATX ODOR KILL in a clean bucket (container) (not one that has had chemicals in it previously). Then add a few (about 5 – 10 drops) of dishwashing liquid (this mild soap should help break the surface tension). Apply this solution onto the floor with the mop. 3- Dip some clean towels or sheets into the mixture prepared in #2 and place them on floor area. Let sit an hour. 4- Open the windows and door of the trailer to have better oxygen. 5. – Remove the towels. The wet wood will have a smell of its own and there could be off gassing from the malodors. 6. Mop up the entire area with just water, preferably warm. 7. Probably w
