How link to Samsung NX System?
• Interface card NX-SMDR/R-MMC installed on the key system – this card has two ports for hookup of the external computer (it has two plug-and-sockets of “female” type with 9 contacts). There two holes with inscriptions “R-MMC” and “SMDR” on the left of the NX key system. Usually this card is not included in basic NX complete set and shall be purchased additionally. • Properly wired connecting cable – look for cable pins assignment scheme. If you have all this stuff, you should switch one cable end to the free COM-port of your computer, and the other one – to the R-MMC plug-and-socket of the NX-SMDR/R-MMC card. Important: All commutations are recommended to be carried out, after you will switch-off the computer. Preliminary Programming of the Samsung NX System If you never used the NX system programming from external computer, you shall carry out several additional operations in order to prepare the system: • Enter the programming mode with system telephone • Look for and remember the p
