How is solid manure applied to cropland?
The most common equipment for applying solids to the land is a rear-discharge, box-type spreader equipped with beaters that broadcast the manure over a width of several feet (see Image 1). Usually, the manure is conveyed to the beaters at the rear by slats attached at each end to a sprocket-driven chain. Some use a powered front end-gate to push the material to the beaters at the rear. To handle semisolid manure, a tight-fitting, closable rear end-gate is required. Some spreaders have a side discharge; most of these have V-shaped hoppers and feed the material to the discharge with augers. A rotating expeller slings the material out of the discharge port. The application rate is varied by an adjustable gate opening, usually operated by a hydraulic cylinder. Flail-type spreaders have a semicircular hopper bottom and a rotating shaft with chain-suspended hammers to fling the material from the hopper. The flail-type and the side-discharge spreaders are adapted to both semisolid and solid m
