How hard is the AVC system to install?
Our system was designed to be a stand alone solution. Many control systems, especially those using PCs to operate have no outputs for communication with a height control. So we designed it to be self contained. Only an input from your start relay that is now being used to start the plasma and an arc voltage are required. The height control takes over monitoring the plasma system is issuing start and stop commands to it. If the arc is lost, the system will issue a stop command to the plasma and raise the torch to its full up position. Mounting the lifter station requires only two 5/16 diameter bolts. A slot is provided in the station to allow for position adjustments and variations. The mounting surface should be flat and free of protrusions. If you need dimensions just call or e-mail.
