How far can Swann Nighthawk camera see at night?
The Infra-red LEDs can project IR light that is invisible to the human eye but can be seen by the Swann Nighthawk Camera to a distance of 16ft/5m. With a small amount of ambient light, such as street lighting and house lighting, the distance can be extended by a small distance. Q: My NightHawk 2 Pack system has two (or three if additional camera has been purchased) cameras but the receiver still switches through all four channels even though some are not used, can I change this? A: You will need to use the remote control to set the receiver for looping between specific channels. First reset the receiver by turning it off and turning it on again using the power switch on the side of the receiver unit, this is done just in case there is a previous instruction that is still running on the unit. • Press the circular arrow button at the bottom of your remote control. You should see the letter ‘L’ appears on the display panel at the front of your receiver. • You will now need to select t
