How exactly does the Golight Stryker mount?
The Golight Stryker simplifies that mounting process. At the base of the Golight, one removes the locking screw and the interlocking base plate slides out from under the light. This zinc plated plate has 3 screw holes. Use the plate as a template to mark the three holes to drill in the mounting surface. Drill the holes and attach the plate using the metal screws provided. If necessary, coat the screw holes with silicone. Pull the wiring from the base of the light through the access hole in the plate and slide the light back on to the mounting plate. Replace the locking screw and push the rubber gasket into place. See our Golight page for more information.
