How easy is it to fit a rear-view camera system?
Fitting a rear-view camera system is well within the capabilities of anyone with basic technical ability and the correct tools. The hardest and most time-consuming part of fitting one is usually running the cable which connects the camera to the monitor. The camera gets its power from the monitor and therefore does not need to be connected to a power supply. The monitor has to be connected to 12V or 24V supply and that\’s about it. Full instructions are included with all our kits. Where\’s the best place to mount the camera? The best mounting place for the camera is high as possible. This high position gives good all round visibility and very good perspective of how close you are to objects. Where as fitting a camera low down doesn\’t give any perspective of how close you are to possible dangers. Where\’s the best place to run the cable between the camera and the monitor? With the camera mounted up high, it\’s possible to use plastic mini trunking on the roof. It can be glued using som
