How does the Urosensor stay attached in the underwear?
The detector is put inside a mini pad or pantyliner (any inexpensive mini pad or pantyliner will do), and this is done by cutting a 1 inch slit in the absorbing layers towards the top or bottom edge of the mini pad or pantyliner. Put the point of the scissors inside the slit, and moving them backwards and forwards and downwards, create a tunnel inside the absorbing layers so that you can slip the detector inside. Although the detector will usually stay inside the tunnel by itself, to ensure that it does not pull out, you can tape across the slit with a sticky tape. With the slit facing upwards, the mini pad or pantyliner is stuck into the crutch of the underwear using the sticky back surface of the pantyliner or mini pad.
