How does the ATV sound system install on a ATV?
Most of our customers use bungee cords (not supplied) to secure the enclosure to the front of the rack. Every rack is different so make sure you use the correct size bungee cord. Most racks require a pair of 15″ or 20″ bungee cords. We offer an optional mounting kit for our ATV speaker enclosure as well. This system consists of three neoprene mounting studs with washers and nuts. The three neoprene mounting studs go in between the bottom of the enclosure and the top of the rack. Our mounting kit will work with the Polaris plastic racks as well. Determine where to locate the mounts on your rack and the bottom of the enclosure and then drill three 3/8″ or 7/16″ holes through both the rack and enclosure. It is very important to make sure the hole pattern layout is the same for both the rack and the bottom of the enclosure as the mounts need to go through both set of holes. Remove the speakers and the radio (this can be done with a screwdriver or cordless drill) prior to drilling the holes
