How does CompleteHeat work?
The user selects the temperature of the water held in the storage tank. As hot water exits, cold replacement water enters the bottom of the tank. A thermistor mounted on the tank’s side senses when the hot water supply is significantly depleted and the burner ignites to re-heat the water in the tank. A Room thermostat senses changes in temperature and energizes the control system in the AM30 air handling unit. When the room thermostat calls for heating, the system’s pump immediately begins circulating hot water from the storage tank through a heating coil in the air handling module. A time-delay circuit controls the circulating air blower to ensure air is fully heated before it enters the duct work. When the thermostat senses the space has reached the desired temperature, the pump stops circulating hot water and, after a 30-second delay, the circulating air blower shuts off. For cooling, AM30 controls operate the circulating air blower and air-conditioning system in the same manner as
