How does a Mineral Springs Chlorine Generator work?
The Mineral Springs electronic chlorinator generates chlorine by passing low voltage electrical current through the pool water and converting the chloride ions from salt into chlorine. Mineral Springs Generators provide 100% of chlorine requirement. Most pools require less than $200 of minerals per year. Q: How do I add Minerals? A: Most people simply dump the minerals into the shallow end of the pool and then brush it around to speed up the dissolving process. Do not allow the minerals to sit in a pile at the bottom of the pool. mineral water is heavier than fresh water so the mineral water will tend to accumulate at the deepest part of the pool. Run the filter system with the suction coming from the main drain for 24 hours to evenly distribute the minerals throughout the pool. Q: How do I clean my Mineral Generator’s Turbo Cell? A: • Turn filter pump off. • Remove the Mineral Springs TurboCell by loosening the unions on both ends of the cell. • You will need a small plastic bucket (6
