How Do You Use The Canon Power Winder A?
• Push the catch on the battery pack upwards. Unclip the battery pack. There’s a small catch right next to the power switch. Push it away from the power switch. • Slide the battery pack off the winder. Slide off the battery pack. It slides towards the power switch. • Fit four AA batteries. Fit four AA batteries. Lift the hinged silver cover away first, then fit four batteries in the battery compartment. Press the silver cover back into place. • Refit your battery back to the winder. This is almost exactly the opposite of removing it; it’ll click right into place. • Use a coin (or a large screwdriver) to remove the winder coupler from the camera. Remove the winder coupler cover from the camera. This is a small, silver cover on the base of the camera (on the right hand side, if you’re looking at the camera the right way up from the back). Use a coin or a large screwdriver to unscrew it. • The power winder has a compartment to store your winder coupler cover. Store the winder coupler cove
