How Do You Use Molly And Toggle Bolts?
Hanging a picture might seem like an easy task. But sometimes it takes more than a hammer and a nail. Hanging objects over a stud is probably best, but not always an option. Wall anchors, like molly bolts and toggle bolts, can make hanging objects easier. They can also help prevent damage to your walls. Read on to learn how to use molly and toggle bolts. Use the largest molly bolt that can be used in your situation. The larger the molly bolt, the stronger it is. Drill a hole in the wall that is the same diameter as the molly bolt. Some molly bolts have a pointed tip that allows you to just push them into the wall, or hammer them in. However, it is recommended that you pre-drill a hole for these as well. Push the molly bolt into the hole. The head should be flush with the drywall. You can use a hammer or rubber mallet to drive it in if necessary. Turn the screw clockwise until you feel a lot of resistance and the top of the molly bolt is tight against the wall. While you are turning the
