How Do You Use Chamfer Router Bits?
The chamfer router bit is used to make a beveled edge on wood projects and can also be used in multi-sided boxes, planters, columns or beams. There are several styles of the chamfer bit that have different bevel angles and varied lengths of cut. The bit comes in 1/4-inch and 1/2-inch shaft styles and can be used in a router table or freehand router. Unplug the router and install the chamfer router bit. Cut a few pieces of scrap wood material into test blocks. A table saw will work well for this step. They can be any size scraps as long as they are wide enough for the router to ride along. A 3 x 9 inch piece is a good working size. Place a piece of scrap material on a nonslip pad. Adjust the router so the chamfer router bit will cut about a 1/8 inch of material on the first pass. This is good practice to minimize any tear out while you are routering. Run the router from left to right along the scrap material. Adjust the router another 1/4 inch and cut again from left to right. Repeat St
