How Do You Use A Voigtlander Vito B 35Mm Camera?
• The synchronising lever must not be set to V (green). Unfortunate things may result. Make sure that the synchronising lever is not set to V (green). This is the self-timer mode; because of the age of the camera and the weak governing spring, using this can cause the camera to stop working altogether if it has not been serviced recently. • The reversing knob springs up when you pull the reversing lever backwards. Pull the reversing lever backwards. This is the small lever on the side of the camera, on the left if you are looking at it from the back. The reversing knob will spring up. • The hinged base plate, opened. This shows a film present. Lift the lever on the hinged base plate, and turn it clockwise. Pull on the lever to lift the base plate up. Don’t be discouraged if this is stiff. • The back of the Vito B opened. The take-up spool is on the right. Pull the back of the camera open. Wind on the camera until you can see the slot in the take-up spool. • Slide about an inch of the f
