How Do You Use A Soldering Gun On Batteries?
Using a soldering gun to connect leads, positive and negative contacts, on battery terminals is best accomplished through quick and careful soldering. If you are new to soldering, it is best to practice soldering other things before attempting to solder on battery terminals. The procedure itself should take less than a minute once the soldering iron heats up and you are familiar with the procedure. Put on your safety goggles. Sand the terminal of the battery that you wish to solder. Make sure that the terminal is clean and clamp the battery to make sure that it stays put while you are working. Strip the end of the wire for one 1/2-inch length and and it. Twist the stripped end into a loop that forms a complete circle. Make the loop small enough that the extra wire at the end is able to be bent across the diameter of the loop. Straighten a 7-inch section of solder (which is longer than you really need but gives you a place to hold the solder. Gently sand the tip of the soldering iron. H
