How Do You Use A Sheet Metal Roll-Forming Machine?
Sheet metal roll-forming equipment uses a series of rolls to form complex seams and flanges on lighter gauge sheet metal. The majority of roll-forming machines are geared toward fabricating duct and duct connectors for the HVAC industry. Properly operating a roll-forming machine goes beyond how to turn the machine on; it also includes daily inspections, oiling and cleaning to ensure that the rolls operate smoothly, that the guards are in place and that the metal does not jam, which can cause an injury. Put on your safety glasses. Place the socket that matches the guard bolts onto the 3/8-inch drive ratchet and loosen the nuts that hold the guard onto the top of the roll-forming machine. Lift the guard up to remove it from the top of the roll former. Blow out the area between the rolls with the air hose to remove metal shavings and other debris from the series of rolls, and spray the rolls with tool oil to add lubrication and prevent corrosion from forming on the face of the rolls. Slid
