How Do You Use A Propane Torch For Plumbing Projects?
The small propane torches generally used to sweat copper joints are made in two parts, a combination valve and nozzle assembly, and a replaceable metal tank of fuel. To assemble the torch, simply screw the nozzle assembly to the threaded fitting at the top of the tank. To light the torch, strike a match, hold it near the nozzle and turn the valve slightly clockwise. When the torch lights, gradually open the valve further until the flame becomes large enough to heat the area you will work on. Do not open the valve all the way: the flame will not get much larger and the gas pressure will probably blow it out. It is necessary to hold the torch assembly upright while you are working. If the tank is tilted very much, the liquid inside will flow into the valve, blocking it so that the flame goes out. The propane torch is easy and safe to use if it is handled properly. Caution is necessary, however, because the joints to be sweated with the flame are generally located near flammable parts of
