How Do You Troubleshoot A Tungsten E?
The Tungsten E, like many PDAs, has a soft reset and a hard reset. If, for any reason, the handheld doesn’t respond when you press a button or tap on the screen, check that the keylock isn’t turned on. If the keylock is off and the device isn’t responding, you will need to perform a soft, or possibly a hard, reset. Press a button or tap on the screen. If the device doesn’t respond, check that the keylock isn’t inadvertently turned on. If the keylock isn’t turned on, perform a soft reset. This will stop your handheld and start it again–a bit like rebooting a computer. It will not delete any information stored on the handheld. To perform a soft reset, just press the reset button, which you will find inside the hole on the back panel of the device. Check to see whether the device is operating normally. If the device is still not functioning normally, you will need to perform a hard reset. A hard reset will clear all the data from your device, so should be used only as a last resort. Pres
