How Do You Troubleshoot A Hunter Pro C?
The Hunter Pro C irrigation controller can be set up to control multiple irrigation stations. It has a weather sensor that can turn off the irrigation when rain is detected. If problems arise with the controller, the best way to identify the cause of the problem is to perform troubleshooting steps. After the cause of the problem has been identified, the troubleshooting process should be continued to resolve the issue. Reduce the number of start times if the controller repeats itself or waters continually when it should not be running. Only one start time should be set for each active program. To set the start times, turn the dial to “Set Program Start Times.” Make sure only one start time is set per program. Check the wiring for the AC power if there is no display. Tighten any loose connections. Replace any broken wires. Inspect the wiring harness if the display reads “ERR.” This error message means there is electrical noise in the system. The wires may need to be replaced with shielde
