How Do You Troubleshoot A Generac Pressure Washer?
Using a pressure washer to clean your car, patio or house is much quicker and easier than using a garden hose. Pressure washers are also handy for preparation work for painting. They can remove the dirt and old paint from any surface. They also use about one-fifth of the water that a garden hose uses, saving water in the process. While your Generac pressure washer will usually function well, sometimes it may not. Ensure that your pressure washer is in good working condition by following these simple troubleshooting steps. Ensure that you are using the correct pressure nozzle and that is not blocked or damaged. Clear any blockage or replace the nozzle if damaged. Check if the water inlet or inlet hose strainer are blocked and clear any blockage. Ensure that there is an adequate water supply and the temperature of the water does not exceed 100 degrees F. Check if the high pressure hose is blocked and clear any blockage or replace it if damaged. Check the gun for any leaks and tighten fit
