How Do You Transfer 8Mm Films To Video?
• Determine whether your films are 8mm or Super 8. 8mm sprocket holes are larger, perhaps one third of the width of the film, and they are on the edge of the film between two frames. Super 8 films have sprocket holes the size of the head of a pin and the holes are located on the edge but bisecting the middle of each frame. • Find a projector designed to project the type of film you have. You may discover that you have some reels of 8mm and some reels of Super 8. Some projectors (Dual 8) can handle both kinds. If you don’t own a projector, check out your local Goodwill, eBay or vintage camera store. You will likely experience flicker in your transfer unless you can find a variable speed projector. Newer, more expensive projectors might have a special mode for video transfer. • If possible, gently clean your films using rewind spindles and pulling the film slowly through a soft, lint-free cloth dampened with a little film cleaner. • Use canned air and an alcohol swab to clean the tape pa