How Do You Tighten Or Replace Coolant Hoses In A Mitsubishi Galant?
Replacing the coolant hoses on a Mitsubishi Galant is an easy project that requires a few basic tools. Check coolant hoses twice a year and replace them when signs of wear or cracking appear. Replace hoses on the Mitsubishi Galant every four years to keep the cooling system working smoothly. Let the Mitsubishi Galant sit for at least an hour before performing maintenance. Jack the car up using the jack lift points directly behind the front wheel and set the car on jack stands. Place a bucket or catch can under the drain plug and remove enough coolant to keep fluid from escaping. Upper hoses require removing little fluid, however lower hoses need the radiator drained. Release the clamps by using pliers on spring clamps or a nut driver on screw clamps. Slide the clamps to the middle of the hose. Twist and pull the hose to release it from the nipple. Use a knife to cut the hose if it’s difficult to move. Slide the clamps to the middle of the new hose and dip both ends in clean coolant to
