How Do You Test Whirlpool Refrigerator Defrost Thermostat-Bi-Metal?
In order to complete this job you will need the following tools: Needle nose pliers phillips screwdriver 1/4″ nut driver Ohm meter/voltage meter Please Note: The process for changing a defrost heating element applies to all three styles of refrigerators. The three styles are, side by sides, top freezer mounts, and bottom freezer mounts. The very first thing that you need to do before you begin your installation is to disconnect the power supply to your appliance. Sometimes there can become a build up of frost on the evaporator panel. If this has occurred on your evaporator panel, you will need to defrost it first. The preferred method is with a hairdryer. DO NOT use a heat gun. It will give off too much heat, and could warp and deform your plastic liner. Once you have defrosted it to the point that you can see the screws, you can stop defrosting. Now you should be able to remove the screws along with the evaporator panel. After the evaporator panel is removed, you will need to defrost
