How Do You Test A Whirlpool Refrigerator Cold Control?
In order to complete this job you will need the following tools: Needle nose pliers phillip screwdriver 1/4″ nut driver Ohm meter (Voltage Meter) The first thing that you need to do , is unplug the refrigerator from its power source. The cold control is a thermostat that regulates the temperature inside of the refrigerator. Most cold controls are located refrigerator not the freezer. Although there are a few that are located in the freezer. This is more commonly found in older models of side by side models. When you have two controls in your refrigerator, the control that has the off position is the Cold Control. The other control operates a damper that allows the airflow from freezer to the refrigerator. Remove the control panel from the wall then you should be able to locate the cold control. The cold control will have two wires that are plugged into it. You will need to remove these two wires, and a long capillary sensor. Note: This test is to be performed while the cold control is
