How do you share one modem for AFax and Internet?
AFax versions below v2.03: For AFax to share a fax modem with RAS (Remote Access Service), set the modem to Send Mode only, and make sure in RAS the modem is configured for Dial Out Only mode. To set a modem to Send Mode only, use AFax Manager. Select “Modems”, and then select the fax modem entry in the right pane. Double click on the entry, or select “Modem” and “Edit” from the menu. The “Edit Modem Configuration” dialog will show up. Make sure in “Send/Receive Mode” the “Send” is selected. Click Ok to reinitialize fax modem. To set RAS to Dial Out only mode, use Control Panel. See Microsoft Windows NT 4.0 documentation for more on RAS configuration. Select Network in Control Panel. Select “Services” tab, then “Properties…” for “Remote Access Service”. Select device to share fax modem with AFax, and select “Configure…”. In “Configure Port Usage” dialog make sure “Port Usage” is set to Dial Out only. Click on Ok if you needed to change to dial out only mode. b) AFax v2.03 and highe
Related Questions
- Im using Sygate to share an analog modem among several computers on the LAN. Can all these computers join races on the Internet through the same modem?
- How can I use Symphoy (Proxim) wireless cards with your software to share my modem by using peer to peer networking?
- How do you share one modem for AFax and Internet?
