How do you replace the heater blower in a 1992 Honda Accord?
Now comes the fun part. The dash will be hindering the removal of the blower motor housing. First, remove the metal band securing the blower motor housing and the heater core housing together. It’s one 10mm bolt at the top. This band clips to another band securing the two housing together on the back side. You will also need to remove the two small phillips screws securing the rear band to the blower motor housing…one on the top and one on the bottom. The rear band gets in the way when removing the housing. So when the housing assembly drops remove the rear band from the top…set this part in first on installation. Last, remove the four 10mm nuts securing the blower motor housing to the firewall. One more thing…on the side of the dash facing the door, there are two more bolts hidden under color keyed caps (about 1″ in diameter). Pop off the caps carefully so as not to break off tabs, then remove the two bolts (10mm). Now, the housing can be removed by carefully pulling back on the
