How Do You Replace Saturn 2000 Rear Drum Brakes?
A helpful hint when replacing the rear drum brakes on a 2000 Saturn is to remove both drums and only take apart one side at a time. This way you can use the other side as a reference to look at and help you replace all the components back into position correctly. Another helpful hint is when you initially remove hold down springs and adjusters and such, you lay them down on the ground or out of the way, but facing the same way they were removed. This will help remind you how the components were removed and should be replaced in the same manner. There are a lot of little parts in rear drum brakes of a 2000 Saturn and it’s obviously important to replace them correctly. Park the 2000 Saturn on a level paved or concrete surface. Place a wheel chock in front of one of the front tires. Break the lug nuts loose on both rear tires with the breaking bar and a socket. Lift one rear quarter panel using the floor jack and place a jack stand under the rear rocker panel. Repeat this step for the oth
