How Do You Replace Acrylic On Tanning Beds?
Whether you own a salon that provides a tanning service or you have a tanning bed in your home for personal use, routine maintenance is needed to ensure the tanning beds are at optimum performance. Acrylics should be cleaned at least once a month because a tanning bed could lose effectiveness if left dirty. Should you notice a crack in the acrylic, it needs to be replaced. Knowing how to replace the acrylic on a tanning bed yourself will save you time and money. Locate the hinged profiles of the tanning bed. These profiles run the length of the tanning bed, in the front and the back. They hold the acrylic shield into place. Pry up on the inside edge of the profile by pulling from the middle. Carefully do this until the latching action is released. The entire length of the profile must be pried away until it freely swings back. Use caution, as the edges of the acrylic shield may be sharp. Repeat the above steps for the second profile. Stand in front of the tanning bed and grab the long
