How Do You Replace A Window Lift Motor In A Ford F-250?
When a power window fails to operate, it is necessary, given all the components in the system, to narrow the failure down. If a window has failed in only one door, you can safely assume the problem is in that particular door. Check the bottom terminals of the switch to the window motor when the switch is activated. If there is power flowing to the window motor, it is definitely a motor problem. Here’s how to replace a window motor in your Ford F-250. Remove the two Phillips screws in the truck’s armrest, as well as the one screw securing the door handle. Remove any other screws that may be in the outside edges of the door panel. Lift the door panel straight up to unhook the inverted hooks on the panel from their holes in the door. Pull the door panel away from the door far enough to disconnect the electrical connector from the window switch. Remove the moisture shield. Disconnect the electrical connector from the window motor. Using a ΒΌ-inch drive socket, pull out the bolts securing th
