How Do You Replace A Stabilizer Bar In A Saturn VUE?
The Saturn Vue was the first “homegrown entry” by Saturn and General Motors into the small, car-based SUV market. Established competition forced Saturn to come out swinging: the Vue offered a roomy cabin, extensive options, a number of drivetrain options and an attractive pricetag. Saturn has paid close attention to consumer responses and needs and improved the Saturn accordingly. The following steps guide you through the installation of a new stabilizer bar. Use the steering wheel to position the front wheels fully to the right. Raise the vehicle on secure supports. Take off the front wheels with the tires. Take the stabilizer link off the stabilizer bar, then remove the nut from the outer tie rod to steering knuckle. Dispose of the nut. Separate the outer tie rod from the steering knuckle with a tie rod separator SA91100C. Remove the bolts that connect the cradle to the stabilizer bar clamp. Remove the clamps and the bushings from the bar. Pull the stabilizer bar away from the vehicl
