How Do You Replace A Hoover Dimension Vacuum Drive Belt?
Vacuum belts are an important component in the operation of a vacuum cleaner. The belt spins the agitator brush, which is used to loosen dirt in carpets and allow the suction action of the cleaner to draw it into the machine. The vacuum belt wears out over time and eventually breaks or becomes so loose that it doesn’t spin the brush. The vacuum belts in Hoover Dimension vacuum cleaners do not need to be sent to a service technician, as you can repair them yourself. Unplug the vacuum cleaner to prevent accidental operation, and pull the hose out of the cleaner. Release the handle, and lay it on the floor to make changing the belt easier. Grip the nozzle control knob, and pull it off the machine. Flip the machine over so the bottom of the nozzle faces up. Remove the bottom plate attached to the nozzle by inserting the screwdriver into the wide slot on the right of the nozzle and pushing the screwdriver handle forward. This will release one of the bottom plate latches. Repeat with the slo
