How Do You Replace A Belt On A Panasonic Vacuum MCV7315?
The Panasonic MCV7315 is the entry-level model in the Panasonic MCV 7-series of upright vacuums. This line also includes the MCV7335 and the MCV7355. The operating instructions are the same for all Panasonic 7-series models. Replacing the belt in your Panasonic vacuum will keep your vacuum operating efficiently. It only takes five to 10 minutes to change the belt. Step 1 Turn your vacuum’s power off. Turn the brush level selector at the base of your vacuum to the “Carpet” setting. Step 2 Unplug the power cord and turn the vacuum over, exposing the agitator brush bar and the wheels. Step 3 Remove the two Phillips screws in the center, and then press the two locking tabs (right next to the wheels) to release the lower plate cover. Remove the cover and set it aside. Step 4 Lift the agitator brush bar up and carefully remove the end cap on the side where the belt is connected. The end cap also contains a washer. Do not lose the washer because you will need it to reinstall the agitator brus
