How Do You Repair Your Ipod Nano Gen 1?
Welcome to the iPodRepairSquad.com iPod Nano Gen 1 disassembly manual. These units are small and fragile so please use care when handling your unit. Opening the Case • Be sure the Hold Switch is turned on. You will see orange when you have the hold in the correct position. • Using 1 soft tool wedge it into the side of the iPod. It is preferred to stay away from the hold switch and the headphone jack. • Using a side to side motion, loosen the iPod while gently prying up and down. It can be helpful to insert 2 soft tools at once, using one to hold the gap open and the other to slide. • There are several clips holding the case in place, so work your way around and pop one side off first, then proceed to the top or bottom and the case should snap right off.
