How Do You Remove The Front On A Whirlpool Duet Washer?
When the need arises to replace the counterweights or springs on a Whirlpool Duet washer, the front of the washer will need to be removed. Once you know how to remove the front on a Whirlpool Duet washer, the parts will be readily accessible. The front panel removal will include removing the control console cover. The entire process can be accomplished in 30 minutes with only a couple of basic hand tools. Disconnect the Whirlpool Duet washer from the wall outlet. Pull the Duet washer away from the wall so that you can access the rear of the washer. Go behind the washer and remove the three screws that secure the top panel to the back of the washer using a Phillips-head screwdriver. Lift the top panel off of the washer and set it out of your way. Go to the front of the washer and locate the touchpad assembly ribbon connector. The connector is on the left front side corner. Press in on the connector tabs and pull the wiring connector apart. Pull the dispenser drawer out, and press down o
