How Do You Remove One Way Screws On A Dead Bolt Lock?
Dead bolt locks are made with safety in mind, so they are difficult to disassemble and remove from a door. One of the major obstacles one would come across when trying to take off a dead bolt lock is the one-way screws that hold the two halves together. The screws are made so they can be screwed in with a screwdriver, but the head is rounded off on the opposite side, so there is no way to remove them with a screwdriver. These types of screws are also used on bathroom stalls and cubicles. While there is no efficient way to remove the screws without causing damage to them, they can be taken out with common tools. Step 1 Insert a 1/8-inch drill bit into a drill. Do not use any other size than this. A bigger drill bit will damage the entire lock set, and a smaller drill bit will not be effective. The one-way screws on the inside of most household dead bolts are 1/8 inch. Step 2 Position the drill bit in the center of the screw head. Step 3 Turn on the drill and push firmly. Drill until the
