how do you remove and replace the rear wheel bearing hub on 2000 town & country van?
Answer HUB AND BEARING (REAR) FRONT-WHEEL-DRIVE VEHICLES REMOVAL Raise vehicle on jackstands or centered on a frame contact type hoist. See Hoisting in the Lubrication and Maintenance section of this service manual for required lifting procedure. Remove wheel and tire. Remove brake drum from hub/bearing. Remove rear wheel speed sensor from rear hub/bearing Rear Wheel Speed Sensor This will prevent damage to the speed sensor during removal and installation of the hub/bearing. The rear wheel speed sensor bolts to the hub/bearing. It can not be removed unless the speed sensor is removed first. CAUTION: When working in the area of the rear hub/bearing and when removing it from the rear axle, care must be used so the teeth on the tone wheel are not damaged. Damage to the teeth on the tone wheel will result in false ABS cycling and corrosion of the tone wheel. Remove the 4 bolts Rear Hub/Bearing Mounting Bolts attaching the hub/bearing to the rear axle. CAUTION: Corrosion may occur between t
