How do you remove and replace a power steering pump and reservoir for a 1998 Chevy S10?
I am going to this question as if you have the 4.3 Liter V6. The 2.2 will have a similar process but may require less disassembly. You will need to remove the top fan housing, remove serpentine belt, then unbolt the a/c compressor and set it to the side. Now remove the 4 bolts on the back of the fan itself to free the fan from the fan clutch. This will give you enough room to remove the rest of the components. Now you will need a pully puller to remove the pulley from the power steering pump. After you do this, you can unbolt and remove the steel piece that held the a/c compressor and power steering pump together. The power steering pump should be visible now. There are 2 bolts on the back of the pump that are somewhat difficult to get to (ratcheting box-end wrenches work great) that will free the pump. Now there are 2 hoses to remove, one is screwed into the back while the other is simply clamped on. You probably want an oil pan under the vehicle before you remove these since power st
