How Do You Remount A Trucks Upper Control Arm?
During the process of replacing the upper and lower ball joints in a truck, you will need to remount the upper control arm. This maintenance process can be done with a few tools and a little patience, and will help you save money and down time for your car. Complete the replacement job on the upper and lower ball joints, then start the reassembly process. Make sure you have all the parts and tools you need close at hand to make the remounting of the upper control arm easier. Check to make sure you have the correct control arm, as they are not identical. To determine which side you are on, consider the placement of your side to the inside. For example, the driver’s side is considered the left side. Look for the “L” or “R” stamped onto the control arm piece. Look at the cam adjuster to make sure your index mark is still there. This will help you re-install it properly. Place the control arm into place, then slip on the cam adjuster and the camber bolt, which holds it together. It could t
